高压气体增压设备采用的动力源

它是使用压缩空气为动力源，以气体增压泵为压力源，输出气体压力与驱动气源压成比例。通过对驱动气源压力的调整，便能得到相应的增压后的气体压力。当驱动气源压力与增压后的气体压力平衡时，增压泵便停止充压，输出气体压力也就稳定在预调的压力上。因而具有防爆、输出压力可调、体积小、重量轻、操作简单、性能可靠、适用范围广等特点。它特别适用于阀门、管路、连接件、压力容器等受压设备的试压检验。同时也适合科研、检验部门检测工具

特别适用阀门管路，高压容器及连接件等受压设备的试压试验，气瓶充装试验，气密性试验，密闭性试验，爆破耐压测试等，同时也可用于学校，科研及检验部门的检测工具用。该机器还可使用在三坐标测量机、激光打标机、数控加工中心、氩弧焊接机、二氧化碳保护焊焊接机、啤酒厂包装设备、啤酒厂气控阀门、啤酒厂麦芽充氧设备、气密性试验机等各种高精度气动设备需要增压的场合。

1）适用于多种气体驱动:压缩空气，氮气，水蒸气，天然气等均可作为泵的驱动气源。
1) suitable for a variety of gas drives: compressed air, nitrogen, water vapor, natural gas, etc. can be used as pump driven gas source.
2）应用范围广:工业领域用于机床中的气动卡盘夹紧，蓄能器充气，高压气瓶充气，将低压气体转换为高压气体等。凡是气源压力不够高，无论是工业机械或是测试装置，均可采用赛思特气体增压泵。
2) the application range is wide: the industrial field is used to clamp the pneumatic chuck in the machine tool, the accumulator is inflated, the high-pressure gas cylinder is inflated, and the low pressure gas is converted to high pressure gas. All gas source pressure is not high enough, whether it is industrial machinery or test device, can use the Si st gas booster pump.
3）自动保压:无论何种原因造成的保压回路压力下降，赛思特泵将自动启动，补充泄露压力，保持回路压力恒定。
3) automatic holding: no matter what causes the pressure drop of the pressure retaining loop, the SST pump will start automatically, replenish the leakage pressure and keep the loop pressure constant.
4）操作安全:采用气体驱动，无电弧及火花，完全可用于有易燃易爆的液体或气体的场所。
4) operation safety: gas drive, no arc and spark, can be used for flammable and explosive liquids or gases.
5）维护简单:与其它的气驱泵比较，赛思特泵将完成同样的工作，但其零件及密封件少，维护更加简单方便。
5) simple maintenance: compared with other gas drive pumps, the Si st pump will complete the same work, but its parts and seals are few, and its maintenance is simpler and more convenient.
6）性价比高:赛思特气体增压泵是一种活塞式泵，工作时该泵将迅速往复工作，随着输出压力的增高，泵的往复运动速度逐渐减慢直至停止，此时，泵输出的压力恒定，能量消耗低，各部件停止运动，由于活塞式泵结构简单，故更易于维护。
6) high cost performance: jesst gas booster pump is a type of piston pump, when working, the pump will work quickly and reciprocate. With the increase of output pressure, the reciprocating speed of the pump gradually slows down to stop. At this time, the pump output pressure is constant, the energy consumption is the lowest, the components stop moving, because the piston pump is simple, It is easier to maintain.